HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

[threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
[tiercontrol={enable|disable}] [automigration={enable|disable}]
[migrationinterval={0|1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
When changing only the settings related to the THP pool:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
[threshold=THP-pool-threshold-1]
[threshold2=DP-pool-threshold-2]
[threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
[tiercontrol={enable|disable}] [automigration={enable|disable}]
[migrationinterval={ [monitoringmode={0|1}]1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
Format for XP24000/XP20000
When the command is used to expand a pool for Thin Provisioning Software:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
adddevnums=device-number-of-logical-unit
[threshold=Thin-Provisioning-Software-pool-threshold]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
When changing the thresholds only:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number
poolid=pool-ID
[threshold=Thin-Provisioning-Software-pool-threshold]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
Parameters
Table 67 ModifyPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Command reference172