HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

server.agent.rm.centralizePairConfiguration
disable
Specify this value to manage copy pairs for each host when the system uses the local management
method. To use the local management method, you need to install the Device Manager agent
and on each host.
When the local management method is used, if you specify LUs as a copy pair that has different
hosts, make sure that each LU is recognized by each host.
enable
When the system uses the central management method, specify this value to manage all copy
pairs with a single host (pair management server). To use the central management method, you
must install the Device Manager agent and only in the pair management server, and the Device
Manager agent only in other hosts.
When the central management method is used, if the pair management server recognizes the
command device in each storage system, the server can use all LUs, including LUs that are not
recognized by the hosts of each storage system, to create copy pairs.
Default: disable
server.agent.rm.cuLdevForm
Specify the output format for LDEV numbers when pair volume information is written in HORCM_LDEV
format in the configuration definition file when creating pairs. If omitted, the information will be output
in decimal format.
DECIMAL
Specify to output in decimal format.
CULDEV
Specify to output in CU:LDEV format.
HEXA
Specify to output in hexadecimal format.
This property is enabled only when creating copy pairs for . In addition, if a virtual command device
is used for the target copy pair command device (if a command device is set for the HORCM_CMD
parameter in IPCMD format), LDEV numbers will be output in decimal format regardless of the value
specified for this parameter.
Default value: CULDEV
server.agent.rm.exclusion.instance
On the host where the Device Manager agent is installed, to exclude volume pairs already managed
by from Device Manager operations, specify the applicable instance numbers. The volume pairs
excluded from Device Manager operations are also excluded from Replication Manager operations.
To specify multiple instance numbers, separate the individual numbers with commas (,). From the
Device Manager agent, you cannot operate a whose instance number is specified in this property.
Default: None
server.agent.rm.location
Specify the installation directory in the following cases:
Specifying Device Manager agent properties350