HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

DescriptionItem
Specify a value (in ten millisecond units) or -1.poll(10ms)
Specify the timeout period in ten millisecond units.
timeout(10ms)
Table 87 HORCM_CMD parameter items and descriptions
DescriptionItem
In Windows:
Specify the command device using the IPCMD format, PhysicalDrive format, GUID
format, or CMD format.
In UNIX:
Specify the command device using IPCMD format or a special file.
You can specify more than one command device in the same system, and you can specify
a command device in more than one system.
dev_name
Table 88 HORCM_DEV parameter items and descriptions
DescriptionItem
Specify the group name.
dev_group
Specify the name of the pair volume.
dev_name
Specify the port name.
port#
Specify the target ID of SCSI/Fibre.
targetID
Specify the LU number of SCSI/Fibre.
LU#
Specify the mirror descriptor using a numeric value or the h addition. You can omit this
by leaving it blank.
MU#
Table 89 HORCM_LDEV parameter items and descriptions
DescriptionItem
Specify the group name.
dev_group
Specify the name of the pair volume.
dev_name
Specify the system number of the storage system using the decimal number or
serial-number:journal-ID format.
Serial#
Specify the LDEV number using the decimal number, hexadecimal number, or
CU:LDEV format.
CU:LDEV(LDEV#)
Operation and maintenance of the Device Manager agent218