HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

2. Stop any service that uses a port having a port number used by the CIM/WBEM service.
The table below shows the port used by each CIM/WEB feature.
Table 48 Port number used by CIM/WBEM features
Port number usedFeature
For non-SSL communication: 5988 (default)
For SSL communication: 5989 (default)
Object operation feature
427Service discovery feature
Execute the following command to determine if any running service program is using the same
port to be used by each CIM/WBEM feature:
• In Windows: netstat -anp TCP
• In Linux: netstat -tan
If any service program using the same port is running, change the port number for the service
program.
If any running service program (normally, another WBEM service program) is using the same
port to be used by the object operation feature, the object operation feature is not available.
If any service program is running (normally, another SLP service (or SLP daemon)) that uses the
same port (427) to be used by the service discovery feature, attempts to start the SLP service (or
SLP daemon) for Device Manager will fail.
3. Set up and start the SLP service (or SLP daemon).
Set up the SLP service (or SLP daemon) to enable the service discovery feature. For details about
how to set up this feature, see “Settings for the service discovery feature” on page 143.
CAUTION:
In the SLP service (or SLP daemon), register the port used by CIM/WBEM features by default.
For the ports used by CIM/WBEM features, see “Settings for ports used by CIM/WBEM
features” on page 141.
4. Restart the P9000 Command View AE Suite product services.
In Windows:
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Stop.
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Start.
In Linux:
installation-directory-for-Common-Component/bin/hcmdssrv -stop
installation-directory-for-Common-Component/bin/hcmdssrv -start
CAUTION:
When an external storage system is connected to XP24000/XP20000 or
XP12000/XP10000/SVS200, if there is a large number of LDEVs managed by Device
Manager, it might take time for the services to start.
Settings for CIM/WBEM140