HP StorageWorks Command View XP Advanced Edition Device Manager Server Installation and Configuration Guide (December 2005)

Windows® Systems Installation 45
10. Re-create a database system on the shared disk: <common component installation
folder>\bin\hcmdsdbremake /cluster /databasepath <database target
folder>
CAUTION: The file name for <database target folder> must be no more than 63 bytes, and you must
specify an absolute path to it without a path delimiter at the end.
CAUTION: On the shared disk, deploy the folder in which the database is to be recreated.
CAUTION: When this command is executed, it sets the port for HiRDB at the default (23032). If you use a
different port, you must reset the port following this command.
NOTE: This operation restarts Common Component.
11. Back up the database (see section 3-7-1 if you need instructions).
12. Register the database that you previously backed up to the recreated database system:
<common component installation folder>\bin\hcmdsdbmove /import
/<datapath target folder>
CAUTION: Specify an absolute path to the <datapath target folder>.
13. Stop the Common Component services: <common component installation
folder>\bin\hcmdssrv /stop
NOTE: Do not stop the Common Component service while another Command View XP AE Suite program is
running.
14. Open the Windows
®
Services panel (see Figure 3-24). For each of the following services, open
the property, and then change Startup Type from Automatic to Manual:
• HiCommand Suite Single Sign On Service.
• HiCommand Suite Common Web Service.
• HiCommandServer.
Figure 3-24 Windows® Services Panel