HP StorageWorks Command View XP Advanced Edition Device Manager Server Installation and Configuration Guide (December 2005)

Appendix A Overview of CIM/WBEM 140
MMdd: Month (MM) and day (dd) of the execution time
HHmm: Hour (HH) and minute (mm) of the execution time
N: A value from 1 to 4 is set for each execution performed at the same time (hour and minute). If
this value is 5 or greater, the log is not output.
A-4-2-5 propdir
This property specifies the directory containing the cimom.properties file. Do not change the value
of this property.
A-4-2-6 logdir
This property specifies the directory containing the repository (compilation results of the MOF file:
store). Do not change the value of this property.
A-4-3 The cimom.properties File
Save the cimom.properties file in the directory specified by the propdir property in the
wbemservices.properties file.
A-4-3-1 org.wbemservices.wbem.cimom.pswdprov
This property specifies the authentication class for Device Manager. Do not change the value of this
property.
A-5 Setting the Service Discovery Feature
This section describes how to set the service discovery feature of Device Manager. To use the service
discovery feature of Device Manager, you need the following prerequisite software:
OpenSLP 1.0.11
OpenSLP is attached to Device Manager. When you install Device Manager, the required file is
copied. For details on OpenSLP, see the OpenSLP website (http://www.openslp.org/).
OpenSLP, the SUNWslpr package, and the SUNWslpu package need to be set up separately. For the
setup procedure, see section A-5-1.
When starting the CIM client, set the language tag (locale) for the service discovery feature to English
(en).
A-5-1 Setting Up the Service Discovery Feature
When you install Device Manager, the OpenSLP file is copied simultaneously. To use the service
discovery feature, you need to register the SLP daemon (service name: slpd, display name:
Service Location Protocol) as a Windows service. Perform the following procedure to register
the SLP daemon as a Windows service.
To register the SLP daemon:
1. Install Device Manager, and then log on as a member of the Administrator group.
2. Display the command prompt and move to the folder containing the OpenSLP executable file.
OpenSLP is installed in the following folder:
<Device-Manager-installation-folder>\HiCommandServer\wsi\bin\windows
NOTE: Device Manager is installed in the following folder by default:
C:\Program Files\CVXPAE\DeviceManager
3. Register the SLP daemon as a Windows service.
Execute the following command:
> slpd -install