HP P9000 Replication Manager Software 7.2 Configuration Guide

• When Replication Manager is used to distribute disk configuration definitions files to a host linked
with HP StorageWorks P9000 for Business Continuity Manager 6.6.1, an error occurs (RPM-
00568) in Replication Manager.
In either of the above cases, Replication Manager cannot be used to edit the disk configuration
definition files that were created by HP StorageWorks P9000 for Business Continuity Manager 6.6.1.
Instead, you must use HP StorageWorks P9000 for Business Continuity Manager 6.7 or later to edit
the disk configuration definition files and then perform volume scan or distribution with Replication
Manager).
Supported storage systems
Replication Manager supports all storage systems supported by Device Manager server:
• XP512/XP48
• XP1024/XP128
• XP12000/XP10000/SVS200
• XP24000/XP20000
• P9500
For details, see the HP P9000 Command View Advanced Edition Suite Software Administrator Guide.
TIP:
For best results, ensure that you have the latest version of the storage system microcode as well as
the latest version of P9000 RAID Manager installed.
NOTE:
Before using copy groups defined in storage, ensure that the microcode version of the P9500 system
is 70-02-00-XX/XX or later.
How Replication Manager collects data
This section describes how data is acquired and the flow of processing between individual programs.
The elements of the following diagram are explained in the text that follows.
Data collection in open systems
This section describes the data collection and flow of processing between programs in open systems.
Replication Manager system configurations and requirements38