HP P9000 Command View Advanced Edition Suite Software 7.4.1-03 Release Notes (TB581-96357, May 2013)

functioning as specified. To create an odd-numbered block size, use the CLI AddLogicalUnit
command or AddVirtualVolume command.
Extraction with volume capacity when allocating volumes
In the Allocate Volumes dialog box or Allocate Like Volumes dialog box, when the extraction condition
for the volume capacity is specified even if a volume whose condition meets the condition exists in
storage systems, the candidate volume may not be extracted with the following message:
The capacity value is outside the valid range. Specify a value from
"<minimum capacity>" to "<maximum capacity>"
(KAIC15294-E)
This symptom occurs when all of the following conditions are met:
• XP P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or XP1024/XP128 is selected in
the Storage system box.
• Basic Volume is selected in the Volume type box.
• A capacity that is greater than 3,145,663.75 MB (approximately 2.99 TB) is specified in the
Volume Capacity text box.
If this occurs, select a target volume and then allocate it to a host.
Creating a Smart pool in XP P9500
In the Create Pool dialog box, if operations for creating a Smart pool meet all of the following conditions,
creating the Smart pool may generate the KAIC07861-E error indicating that the cycle time is invalid:
• An XP P9500 whose microcode version is earlier than 70-02-00-00/00 is selected in the Storage
System box.
• Smart is selected as pool type.
• Auto is selected as tier management of Smart Options.
If this occurs, select 24 hours in the Cycle time box, and then select the Show Plan button.
Values displayed in Removable column of pool volume list
If Yes appears in the Removable column of the pool volume list, removing pool volume in shrink pool
process may not succeed under any of the following conditions.
• The pool usage rate has exceeded the Depletion Threshold, or the pool status is blocked.
• The pool volume status is blocked.
• If the pool volume is removed, the pool usage rate exceeds Depletion Threshold, or the pool
subscription rate exceeds Subscription Limit.
Changing the port numbers in CIM/WBEM function
To change port numbers by using CIM/WBEM function, all of the following properties must be
configured.
For http port number
[FILE(1)]
• Windows:
<installation-folder-for-the-Device-Manager-server>\Server\wsi\server\jserver\bin\cimxmlcpa.properties
• Linux:
<installation-directory-for-Device-Manager-server>/Server/wsi/server/jserver/bin/cimxmlcpa.properties
Property name: HTTPPort
20 Important considerations