HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

You can use the subtarget parameter to specify the device information you wish to obtain. For
the values that can be specified for the subtarget parameter, see Using the GetStorageArray
parameter on page 126 .
Table 6 Logical group commands
DescriptionCommand name
Obtains information about logical groups.
GetLogicalGroup
Table 7 LUN commands and related storage systems
XP1024/
XP128
XP12000/
XP10000/
SVS200
XP24000/
XP20000
P9500DescriptionCommand name
YYYY
Defines a path to a
volume from the host.
AddLun
YYYY
Sets the security of a
LUN in the host stor-
age domain by assign-
ing its WWN in the
host storage domain.
AddWWNForHost-
StorageDomain
YYYY
Deletes the path to a
volume from the host.
DeleteLun
YYYY
Deletes a WWN from
a port.
DeleteWWN
YYYY
Releases the security
set to a LUN in the
specified host storage
domain.
DeleteWWNForHost-
StorageDomain
Legend:
Y: Indicates that the particular storage system can be used to execute the command.
--: Indicates that it cannot be used to execute the command.
Table 8 Host management commands
DescriptionCommand name
information about a host into the Device Manager server database.
AddHost
host-based information about a LUN into the Device Manager server database.
AddHostInfo
Refreshes information that can be acquired from the Device Manager agent, about
a host managed by the Device Manager server.
AddHostRefresh
information about a virtualization server into the Device Manager server database.
AddVirtualization-
Server
Deletes information about a host from the Device Manager server database.
DeleteHost
Deletes host-based information about a LUN from the Device Manager server
database.
DeleteHostInfo
CLI Reference Guide 35