HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

GetURLLink
GetURLLink obtains information about the URLLinks that are set for a Device Manager object
managed by the Device Manager server.
Format
When obtaining all URLLink information:
hdvmcli [URL] GetURLLink [options]
[targetoption={smi-s|other}]
When obtaining URLLink information for a particular SMI-S Enabled storage system:
hdvmcli [URL] GetURLLink [options]
{objectid=object-ID-of-the-URLLink
|linkedid=object-ID-of-SMI-S-Enabled-storage-system}
targetoption=smi-s
When obtaining URLLink information for a particular Device Manager object that is not an SMI-S
Enabled storage system:
hdvmcli [URL] GetURLLink [options]
{objectid=object-ID-of-the-URLLink
|linkedid=object-ID-of-the-Device-Manager-object}
[targetoption=other]
Parameters
Table 110 GetURLLink command parameters
DescriptionStatusParameter name
The object ID of the URLLink for which you want to obtain
information
Specify the object ID obtained from another CLI response. The
value is encoded by the CLI.
Do not specify this parameter with the linkedid parameter. If
they are specified at the same time, an error will occur.
Optional
#
objectid
The object ID of the Device Manager object
Information about all the URLLinks set for the specified Device
Manager object is acquired. Specify the object ID obtained from
another CLI response. The value is encoded by the CLI.
Do not specify this parameter with the objectid parameter. If
they are specified at the same time, an error will occur.
Optional
#
linkedid
CLI Reference Guide 307