HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

NOTE:
When you execute the GetStorageArray command with the subtarget
parameter specified and without the model and serialnum parameters specified,
if a value other than 0 is specified for statusOfDBInconsistency (which is
displayed under An instance of StorageArray as the result of the
GetStorageArray command), information of the component specified for the
subtarget parameter might not be output to the command output. If a value
other than 0 is written for statusOfDBInconsistency, this indicates that the
status of the database is inconsistent. For details about the meaning of the
statusOfDBInconsistency values other than 0, see “StorageArray
instance” on page 391.
The subinfo parameters:
Specify the subinfo parameters when you want to acquire the information related to a specific
element specified for the parameter subtarget. The subinfo parameters that you can specify
differ depending on the value of the parameter subtarget.
Table 45 shows the element information that can be acquired by using the parameter subtarget.
Table 46 shows the subinfo parameters that can be used together with the parameter subtarget.
Table 45 Element information that can be acquired by using the parameters subtarget
LocationInformation that can be acquiredValue of subtarget
GetStorageArray (subtarget not
specified) , page 131
Basic information about storage systems
subtarget not specified.
GetStorageArray (subtarget=Array-
Group) , page 133
Information about parity groups
ArrayGroup
GetStorageArray (subtarget=Com-
mParameters) , page 138
Information about how to access storage
systems
CommParameters
GetStorageArray (subtarget=Com-
ponent) , page 139
Information about the configuration of storage
systems
Component
GetStorageArray (subtarget=Ex-
ternalStorage) , page 142
Information about the external connection of
storage systems
ExternalStorage
GetStorageArray (subtarget=Filter)
, page 143
Information about the storage system for a
specific element
Filter
GetStorageArray (subtar-
get=FreeSpace) , page 145
Information about the unused capacity in
parity groups
FreeSpace
GetStorageArray (subtarget=Host-
StorageDomain) , page 149
Information about host storage domains
HostStorageDomain
GetStorageArray (subtarget=LDEV)
, page 153
Information about LDEVs
LDEV
GetStorageArray (subtarget=Logic-
alDKC) , page 156
Information about the logical DKC
LogicalDKC
GetStorageArray (subtarget=Logic-
alUnit) , page 158
Information about logical units (LUs)
LogicalUnit
CLI Reference Guide 127