HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

CAUTION:
A configuration definition file should exist as a prerequisite for managing copy pairs from Device
Manager (except for copy pairs defined as a device group).
If a copy pair is created by using Remote Web Console, SVP, or RAID Manager LIB, you cannot use
Device Manager to operate these pairs because the configuration definition file does not exist. To
manage copy pairs created by these management tools, you need to perform either of the following:
• Release the copy pair by using the management tool that was used when creating the copy pair,
and then re-create the copy pair by using Device Manager.
• Manually create a configuration definition file that defines the copy pair.
CAUTION:
The requirements for defining or managing copy pairs by specifying a volume that belongs to the
resource group used in data migration with a virtual ID are as shown below:
• Copy pairs must be configured in such a way that they are managed with the central management
method.
• The configuration definition file must be recreated to match the new environment after migration.
- Specify the physical ID for Serial# of the HORCM_LDEV parameter.
- For the HORCM_CMD parameter, specify the command devices whose storage system resource
group ID is 0 (meta_resource).
• You must enable the authentication mode for command devices, and execute the raidcom com-
mand for all command devices whose storage system resource group ID is 0 (meta_resource) to
complete user authentication. If the operating system of the management server is Windows, user
authentication must be completed by the user who executes the Device Manager agent service
(HBsA Service).
System configuration for using the local management method to manage copy pairs
Set up the management server, hosts (application servers), and storage system so that the prerequisites
are satisfied.
System configuration and requirements56