HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the netsh command to reset the firewall exemptions (when the value of the hdc.ssl.secure
property is 2 or 3).
• Set the same value as the hdc.classloader property of the Device Manager server (when SSL
communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector Base service (for SSL communication), page 276
• hdc.classloader, page 376
• hdc.ssl.secure, page 400
hdc.adapter.esx.timeout
Specify the timeout value, in seconds, for Host Data Collector to acquire information from a managed
virtualization server.
Specifiable range: 0 to 2147483647.
Default: 300
hdc.ssl.secure
Specify the port to be opened for communication between Host Data Collector and the Device Manager
server.
Specifiable range: 1 to 3.
1: Only the non-SSL communication ports are open.
2: Both the non-SSL communication ports and the SSL communication ports are open.
3: Only the SSL communication ports are open.
The correspondences between the hdc.ssl.secure property values and the port numbers to be
opened are as follows:
Table 141 Correspondences between the hdc.ssl.secure property values and the port numbers to be
opened
Port numbers to be opened (Default)
hdc.ssl.se-
cure property
value
22098/tcpRMI registry
1
22099/tcpRMI server
22100/tcpClass loader
22098/tcp, 22104/tcpRMI registry
2
22099/tcp, 22105/tcpRMI server
Host Data Collector properties400