HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

Default: 22099
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.rmiserver property of the Device Manager server (when non-
SSL communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector Base service (for non-SSL communica-
tion), page 275
• hdc.rmiserver, page 375
• hdc.ssl.secure, page 400
hdc.common.http.serverPort
Specify the non-SSL communication port number of the class loader.
Specifiable range: 1 to 65535.
Default: 22100
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.classloader property of the Device Manager server (when
non-SSL communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector Base service (for non-SSL communica-
tion), page 275
• hdc.classloader, page 376
• hdc.ssl.secure, page 400
hdc.common.rmi.ssl.registryPort
Specify the SSL communication port number of the RMI registry.
Specifiable range: 1 to 65535.
Default: 22104
Host Data Collector properties398