Manualshelf

HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

ManualsBrandsHP ManualsSoftwareHP Command View XP Advanced Edition Enterprise Media Kit
351352353354355356357358359360
Device Manager server configuration properties
(server.properties file)
The server.properties file contains the server configuration properties.
• In Windows:
installation-folder-for-the-Device-Manager-server\Server\config\serv-
er.properties
• In Linux:
installation-directory-for-the-Device-Manager-server/Server/config/
server.properties
server.http.host
Specify host names or IP addresses of the management server (Device Manager server).
To specify the IP address, use one of the following formats:
IPv4 format:
x.x.x.x (x: integer from 0 to 255)
IPv6 format:
Specify hexadecimal numbers by using colons (:). You can also use a short format. You can only
use global IPv6 addresses.
A value specified for the host name or IP address must be accessible from clients (GUI, CLI, and
storage systems).
Default: The host name or IP address of the management server specified during installation (if an
error occurs when registering the URL, localhost is set).
CAUTION:
• If multiple NICs are installed on the server computer on which Device Manager is installed, specify
the IP address of the NIC that belongs to the network to which the clients (GUI, CLI, and storage
systems) connect. Do not specify the host name.
• In a cluster environment, the IP address of the cluster manager should be specified.
• If Device Manager manages SMI-S Enabled storage systems and the setting value of this property
has been changed, you must refresh any SMI-S Enabled storage system that is a management
target.
server.http.port
Specify the port to be used for non-SSL communication by the Device Manager server.
The conventional port number used for a standard web server is 80, but there might already be an
intranet server running on this port. Moreover, you should avoid low-numbered ports because these
could conflict with other services installed on the server. As a general rule, you can pick any port
between 1024 and 49151.
Default: 2001
Administrator Guide (Web Version) 351