HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

• Some of the items in the following table cannot be used to determine the host. As such, they
cannot be specified for ip_address.
Table 84 Values that cannot be specified for the ip_address of HORCM_MON parameter
Device Manager agent version
Value
05-70 or earlier05-805.9 or later
YesYesYesIP address
YesYesYesHost name
NoYesYes
NONE
NoNoNo
"__NONE__"
NoNoYes
NONE6
NoNoNo
"__NONE6__"
NoSometimesSometimes
Loopback IP addresses (127.0.0.1 to
127.255.255.254)
NoSometimesSometimes
Loopback host name (localhost)
NoNoNoCluster virtual IP address
NoNoNoCluster virtual machine name
Legend:
Yes: Can be specified.
Sometimes: Can be specified when the copy pair is managed from the Device Manager CLI.
No: Cannot be specified.
• service
Specify the port name or port number.
• Specify the port name using 1 to 15 single-byte characters. The environment must support the
conversion of port names to port numbers.
• Specify the port number as a numeric value from 0 to 65535.
• poll
Specify a value (in ten millisecond units) or -1.
• timeout
Specify the timeout period in ten millisecond units.
Table 85 Support status of HORCM_MON parameter description format
Item
Version
timeoutpollserviceip_address
YesYesYesYes6.1 or later
YesYes
Only supports port num-
ber specification.
Yes5.9 to 6.0
Administrator Guide (Web Version) 243