HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

• A configuration definition file cannot include a line that consists only of space characters.
• If the version of Device Manager agent is 5.5 or earlier, a line that starts with H and includes any
of the following character strings cannot be included (except in the starting line of the parameter):
HORCM_MON, HORCM_CMD, HORCM_DEV, HORCM_LDEV,HORCM_INST, HORCM_INSTP, HOR-
CM_CTQM, HORCM_LDEVG, HORCM_ALLOW_INST
• If the version of the Device Manager agent is from 7.0.0 to 7.0.1, a virtual command device must
not be defined for the HORCM_CMD parameter in the configuration definition file.
• The configuration definition file must be created in accordance with the following conditions:
• HORCM_MON must be defined.
• At a minimum, either HORCM_DEV or HORCM_LDEV must be defined.
• At a minimum, either HORCM_INST or HORCM_INSTP must be defined.
• HORCM_ALLOW_INST must not be defined.
Related topics:
• Configuration definition file parameters supported Device Manager , page 241
• HORCM_MON parameter description format, page 242
• HORCM_CMD parameter description format, page 244
• HORCM_DEV parameter description format, page 245
• HORCM_LDEV parameter description format, page 247
• HORCM_INST parameter description format, page 249
• HORCM_LDEVG parameter description format, page 250
• HORCM_ALLOW_INST parameter description format, page 251
HORCM_MON parameter description format
Use the HORCM_MON parameter to specify the machine information for the local host and the interval
for monitoring errors in copy pair volumes.
• ip_address
Specify the IP address (the Device Manager agent whose version is 5.9 or later supports the IPv6
protocol), host name, NONE, or NONE6. Note that if you use Replication Manager to generate a
configuration definition file, this item will always be specified for the host name (Replication
Manager uses a Device Manager agent to view the configuration definition file).
• Specify the information for the host managed by the Device Manager server.
• Match the IP address version (IPv6 or IPv4) to the one specified for HORCM_INST.
• If an IPv6 environment is being used, specify an IP address. If you specify a host name, an
IPv4 environment is used.
If the OS is Windows Server 2003 or Windows Server 2003 R2, you cannot specify an IPv6
address. When an IPv6 environment is used with Windows Server 2003 or Windows Server
2003 R2, you must specify NONE6.
Using and maintaining the Device Manager agent242