HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

Format for SMI-S Enabled storage systems
When registering an SMI-S Enabled storage system:
hdvmcli [URL] AddStorageArray [options]
ipaddress={IP-address-of-SMI-S-provider|host-name-of-SMI-S-provider}
family=SMI-S_Enabled displayfamily=SMI-S_Enabled
userid=user-ID arraypasswd=user-password
[protocol={Non-secure|Secure}]
[portnumber=port-number-of-SMI-S-provider-service]
When refreshing an SMI-S Enabled storage system:
hdvmcli [URL] AddStorageArray [options]
ipaddress={IP-address-of-SMI-S-provider|host-name-of-SMI-S-provider}
family=SMI-S_Enabled [displayfamily=SMI-S_Enabled]
[userid=user-ID arraypasswd=user-password]
[protocol={Non-secure|Secure}]
[portnumber=port-number-of-SMI-S-provider-service]
saobjid=object-ID-of-SMI-S-Enabled-storage-system
Parameters
Table 28 AddStorageArray command parameters
DescriptionStatusParameter name
IP address
For P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
and XP1024/XP128:
Specify the IP address of the storage system. You can also
specify the host name (alias name).
For P9500 and XP24000/XP20000, this parameter can be
specified by using an IPv6 IP address.
For an SMI-S Enabled storage system:
Specify the IP address of the SMI-S provider.
You can also specify the IPv6 address or host name (alias
name).
Required
ipaddress
Family of the storage systemRequired
family
Display name of the storage system family
You cannot omit this parameter when using the command to
perform initial registration of information.
Required or option-
al
displayfamily
Command reference82