HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

All Resources must be assigned as a resource group.
Table 16 Roles required to execute commands (server management commands)
RoleCommand name
Admin
#
or Modify
#
AddURLLink
Admin or Modify
DeleteAlerts
Admin
#
or Modify
#
DeleteURLLink
Admin, Modify, or View
GetAlerts
Admin, Modify, or View
GetServerInfo
Admin, Modify, or View
GetURLLink
#
All Resources must be assigned as a resource group.
Table 17 Roles required to execute commands (replication commands)
RoleCommand name
Admin or Modify
AddConfigFileForReplication
Admin or Modify
AddReplication
Admin or Modify
DeleteReplication
Admin, Modify, or View
GetReplicationControllerPair
Admin or Modify
ModifyReplication
Notes on executing CLI commands
Note the following when you execute a CLI command:
Table 18 Notes on executing commands
Related commandsDescriptionItem
AddLun
AddHostStorageDomain
AddWWNForHost
StorageDomain
When adding a LUN or host storage domain,
make sure that I/O operations from the host to
the corresponding port have stopped.
If you add a LUN or host storage domain, the
LUN security for the corresponding port will take
effect automatically. Because of this, when the
command is executed, if I/O operations are
taking place from the host to the port being
added, then the I/O operations might terminate
with an error.
Adding a LUN or host storage
domain
CLI Reference Guide 41