HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

DescriptionItem
Specify an IP address in IPv4 format.
IP address (IPv4)
#
Specify an IP address in IPv6 format.
Alphabetic characters are not case sensitive.
IP address (IPv6)
#
Specify the OS type.
Alphabetic characters are not case sensitive.
If the character string specified as this item is defined in the mapping definition
file as a property value, the corresponding OS type is displayed in the GUI.
The OS type is displayed when hosts are listed in the GUI, but is not displayed
when hosts are listed from the CLI.
OS type
#
Multiple data formats can be used for IP addresses . The following shows an example of a host
information file in which multiple data formats are mixed.
Conventions for creating mapping definition files
A mapping definition file consists of lines that specify properties. To comment out lines, prefix them
with a hash mark (#).
The following table describes the properties (and their values) that can be specified in a mapping
definition file.
Table 158 Properties that can be specified in a mapping definition file (import.properties)
DescriptionProperty
Specifies the import start record.
Specify the record number of the record from which import starts
in the host information file (CSV file). You can specify a value
from 1 to 10,250.
This property is required.
import.host.line.start
CLI Reference Guide 403