HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

2. Execute the GetStorageArray command to check whether there is an error in the batch
file.
3. Correct any error in the batch file.
4. Execute the batch functionality again.
If you cannot still resolve this problem, collect the following information, and then contact your
HP Technical Support:
• Device Manager CLI log file
• Device Manager CLI properties file
• Command line input
• Batch file
• Device Manager server log files
When the error code of the storage system is one of the following values:
"1005,1364", "1005,2009", "1005,2010", "1005,2013", "1005,2015", "1005,2032",
"1005,2082", "1005,2083", "1005,2098", "1005,2099", "1005,2500", "1005,2501",
"1005,3002"
"2005,2005", "2005,2009", "2005,2013", "2005,2032", "2005,2082", "2005,2083",
"2005,2084", "2005,2098", "2005,2099", "2005,2502", "2005,3002", "2005,3003",
"2005,3006"
Perform the following procedure:
1. Execute the AddStorageArray command or RefreshStorageArrays command.
2. Execute the GetStorageArray command to check which command lines in the batch file
were applied to the storage system.
The command processing during batch functionality execution is not performed in the order
described in the batch file. All lines need to be checked to determine which command lines
in the batch file were applied.
3. Delete the command lines applied to the storage system from the batch file.
4. Execute the batch functionality again.
When the error code of the storage system is one of the following values:
"1005,2005", "1005,2084", "1005,3003", "1005,3006"
Collect the following information, and then contact your HP Technical Support:
• Device Manager CLI log file
• Device Manager CLI properties file
• Command line input
• Batch file
• Device Manager server log files
When the error code of the storage system is not one of the values listed above:
Perform the following procedure:
1. Execute the AddStorageArray command or RefreshStorageArrays command.
2. Execute the GetStorageArray command to check which command lines in the batch file
were applied to the storage system.
The command processing during batch functionality execution is not performed in the order
described in the batch file. All lines need to be checked to determine which command lines
in the batch file were applied.
3. Delete the command lines applied to the storage system from the batch file.
Batch functionality396