HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

DescriptionAttribute
Maximum allocation threshold value (%) for Tier 1
If a tiering policy has been applied, the maximum capacity threshold value
allocated for Tier 1 is output.
allocation-
ThresholdT1Max
#1, #2
Minimum allocation threshold value (%) for Tier 1
If a tiering policy has been applied, the minimum capacity threshold value allocated
for Tier 1 is output.
allocation-
ThresholdT1Min
#2
Maximum allocation threshold value (%) for Tier 3
If a tiering policy has been applied, the maximum capacity threshold value
allocated for Tier 3 is output.
allocation-
ThresholdT3Max
#2
Minimum allocation threshold value (%) for Tier 3
If a tiering policy has been applied, the minimum capacity threshold value allocated
for Tier 3 is output.
allocation-
ThresholdT3Min
#2
Number of V-VOLs.
The number of Smart volumes assigned to the Smart pool is output.
numberOfVVols
#1
If a data placement profile have been applied from the GUI, the capacity ratio of Tier 1 might
exceed the value specified for the maximum allocation threshold.
#2
If the microcode version of P9500 is 70-05-XX-XX/XX or later, valid values are output.
URLLink instance
The URLLink instance is output when the following commands are executed:
• AddURLLink, page 282
• GetURLLink, page 288
Table 151 URLLink instance attributes
DescriptionAttribute
Object ID of URLLinkobjectID
Name of the URLLink
name
Additional description of the URLLink
This item is output only when an additional description is registered.
description
URL of an application or a Web page
url
Object ID of the Device Manager object for which URLLink is set
linkedID
CLI Reference Guide 381