HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

Legend:
Y: Indicates that the particular storage system can be used to execute the command.
--: Indicates that it cannot be used to execute the command.
Commands related to SMI-S Enabled storage systems
Device Manager CLI supports functions that allow you to use, as external storage systems, storage
systems (SMI-S Enabled storage systems) managed by an SMI-S provider. The table below lists and
describes the supported functions and commands. For details about command specifications, see
Chapter 4 on page 43.
Table 11 Commands related to SMI-S Enabled storage systems
Command nameSupported functions
AddStorageArray
DeleteStorageArray
ModifyStorageArray
RefreshStorageArrays
Registration, deletion, modification, and refresh-
ing of storage systems
GetServerInfo
GetStorageArray (no subtarget specified)
GetStorageArray (subtarget=CommParameters)
Acquisition of storage system information
AddExternalArrayGroup
DeleteExternalArrayGroup
Creation and deletion of external parity groups
AddURLLink
DeleteURLLink
GetURLLink
Registration, deletion, and information acquisi-
tion of URLLinks
Commands and roles
In Device Manager, users are registered in user groups, and resources are registered in resource
groups. By assigning resource groups and roles to user groups, a user's access to resources can be
controlled. Use the GUI to register users and user groups, and assign resource groups and roles.
To execute Device Manager commands, a user must belong to a user group to which resource groups
and roles are assigned. The user can perform operations on only assigned resources and within the
range of their assigned roles. Before executing commands, confirm what limitations there are (what
resources can be accessed and what roles are assigned) with the administrator managing access
control.
CLI Reference Guide 37