HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

DescriptionStatusParameter name
The WWN that is used to provide security for the host storage
domain
To specify two or more WWNs, separate them with commas.
If you specify this parameter, you must also specify the domain
or nickname parameter.
If you specify this parameter, you must also specify the
wwnnickname or newwwnnickname parameter. You must
specify the same number of values for each parameter.
Optional
wwn
The nickname for the WWN
To specify two or more WWN nicknames, separate them with
commas.
The value specified for this parameter differs depending on
whether wwn is specified.
If wwn is specified:
Specify the new nickname for WWN.
If wwn is not specified:
Specify the nickname for the WWN that is used to provide
security for the host storage domain.
If you specify the wwn parameter and do not specify the
wwnnickname parameter, the WWN nickname will not be
changed.
Paired wwn parameters and wwnnickname parameters must be
specified in the same sequence.
You can use the following characters:
A-Z a-z 0-9 ! # $ % & ' ( ) + - . = @ [ ] ^ _ ` { } ~ and
spaces
A WWN nickname cannot begin or end with spaces.
The character string used for a WWN nickname must be within
the following range:
• P9500: 1-64 bytes
• XP24000/XP20000: 1-32 bytes
• XP12000/XP10000/SVS200:
Microcode version earlier than 50-04-01:
1-16 bytes
Microcode version 50-04-01 or later:
1-32 bytes
• XP1024/XP128: 1-8 bytes
If you specify this parameter, you must also specify the domain
or nickname parameter.
If you specify this parameter, you must also specify the wwn or
newwwnnickname parameter. You must specify the same number
of values for each parameter.
Optional
wwnnickname
CLI Reference Guide 205