HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

[automigration={enable|disable}] [migrationinterval={0|1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
When changing only the settings related to the THP/Smart pool:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number poolid=pool-ID
[threshold=THP/Smart-pool-threshold-1]
[threshold2=THP/Smart-pool-threshold-2] [threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
[tiercontrol={enable|disable}]
[automigration={enable|disable}] [migrationinterval={0|1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
Format for XP24000/XP20000
When the command is used to expand a THP pool:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number poolid=pool-ID
adddevnums=device-number-of-logical-unit
[threshold=THP-pool-threshold-1]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
When changing the thresholds only:
hdvmcli [URL] ModifyPool [options]
model=model serialnum=serial-number poolid=pool-ID
[threshold=THP-pool-threshold-1]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
Parameters
Table 70 ModifyPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Pool ID
Specify the pool ID of the THP/Smart pool that you plan to expand
or whose settings you plan to change.
Required
poolid
Command reference194