HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

arrayGroup=32
arrayGroupName=2-3-1
path=false
onDemandDevice=false
devType=
isStandardLDEV=true
guardMode=
diskType=0
slprNumber=0
clprNumber=0
cacheResidencyMode=0
stripeSizeInKB=-1
volumeKind=1
status=Normal
thpType=-1
consumedSizeInKB=2,904,930
mfTrueCopyVolumeType=Simplex
mfShadowImageVolumeType=S-VOL
mfUniversalReplicatorVolumeType=Simplex
mfUniversalReplicatorPoolID=-1
thpPoolID=-1
threshold=-1
systemDisk=0
encrypted=0
tieringPolicy=-1
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=Path)
GetStorageArray (subtarget=Path) obtains the information about paths.
Parameters
Table 57 GetStorageArray (subtarget=Path) command parameters
DescriptionStatusParameter name
Specify Path.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of the path
Specify this parameter when you want to obtain information about
a specific path. If you specify this parameter, you must also specify
the model and serialnum parameters. If you specify the model
and serialnum parameters and omit the objectid parameter,
information about paths for the specified storage system is
obtained. Specify the object ID obtained from another CLI
response. The value is encoded by the CLI.
Optional
objectid
CLI Reference Guide 159