HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

openReservedActualCapacity=2,098,560
numberOfReservedLUs=2
numberOfOpenReservedLUs=2
numberOfImReservedLUs=0
distributedMode=-1
*****: The value is encoded by the CLI.
GetStorageArray (subtarget=ArrayGroup)
GetStorageArray (subtarget=ArrayGroup) obtains information about parity groups.
Parameters
Table 46 GetStorageArray (subtarget=ArrayGroup) command parameters
DescriptionStatusParameter name
Specify ArrayGroup.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, you will obtain information about the
models of all storage systems.
Optional
model
Object ID of the parity group in a storage system
Specify this parameter when you want to obtain the information
about a specific parity group. If you specify this parameter, you
must also specify the model and serialnum parameters.
If you specify the model and serialnum parameters without
specifying this parameter, the information about parity groups in
the specified storage system is acquired. Specify the object ID
obtained from another CLI response. The value is encoded by the
CLI.
Optional
objectid
Information obtained about a parity group or groups
The values you can specify are ExternalPathInfo,
LogicalUnit, PDEV, and
RelatedDistributedArrayGroup. If you specify multiple
values at the same time, separate the values by commas.
Optional
array-
groupsubinfo
Information about a logical unit
The values you can specify are Path and LDEV. If you specify
multiple values at the same time, separate the values by commas.
If you specify this parameter, you must also specify
arraygroupsubinfo=LogicalUnit.
Optional
lusubinfo
Command reference126