HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

You need to specify at least one of the following parameters: ipaddress, hostprotocol,
hostuserid, or hostuserpassword.
Parameter values to obtain in advance
hostname
Obtain this value from the execution result of the GetHost command. Execute this command by
specifying VMWARE_ESX for the hostfilter parameter. In the execution result of this command,
the name value appears under An instance of Host. In the hostname parameter, specify
the name value for the virtualization server whose information you want to modify.
Command execution example
hdvmcli ModifyVirtualizationServer
-o "D:\logs\ModifyVirtualizationServer.log"
"hostname=boss.boss" "hostuserpassword=boss!"
Command execution result
RESPONSE:
An instance of Host
objectID=*****
name=boss.boss
hostID=1
capacityInKB=21,995,840
hostType=3
statusOfDBUpdating=0
virtualizationServerVersion=VMware ESX 4.0.0 build-171294
List of 1 CommParameters elements:
An instance of CommParameters
ipAddress=10.208.119.114
portNumber=5989
protocol=Secure
userID=vi-admin
*****: The value is encoded by the CLI.
RefreshVirtualizationServer
RefreshVirtualizationServer refreshes information about virtualization servers.
NOTE:
When using VMware ESX 3.5 with virtualization software and not vMA, registering the virtualization
server might take a few hours to complete, depending on the configuration of the virtualization server
and the number of volumes connected.
Command reference258