HP P9000 Command View Advanced Edition Suite Software 7.2 Administrator Guide (web)

DescriptionItem
Specify the IP address (a Device Manager agent whose version is 5.9 or later also
supports the IPv6 protocol), the host name, NONE, or NONE6.
If you specify NONE or NONE6, the local host is assumed.
If you use Replication Manager to add a new group to the existing configuration definition
file, this item will always be specified using the host name.
ip_address
Specify the port name or port number.
service
Detailed rules for configuration definition files
This subsection explains the description rules for configuration definition files for each parameter.
HORCM_MON parameter
The following explains the description rules related to ip_address and service.
• For ip_address, specify the information for the host managed by the Device Manager server.
• The host name specified for ip_address is case sensitive.
• Match the IP address version (IPv6 or IPv4) specified for ip_address to the one specified for
HORCM_INST.
• If an IPv6 environment is being used, specify an IP address for ip_address. If you specify a host
name, an IPv4 environment is used.
• If the OS is Windows Server 2003 or Windows Server 2003 R2, you cannot specify an IPv6
address. When an IPv6 environment is used with Windows Server 2003 or Windows Server
2003 R2, you must specify NONE6.
• The following values are not allowed for ip_address because the Device Manager server cannot
resolve a host with those values.
When the version of the Device Manager agent is 5.9 or later:
Cluster virtual IP address
Cluster virtual machine name
__NONE__
__NONE6__
When the version of the Device Manager agent is 5.8
Cluster virtual IP address
Cluster virtual machine name
NONE6
__NONE__
When the version of the Device Manager agent is 5.7 or earlier:
Loopback IP address (from 127.0.0.1 to 127.255.255.254)
Loopback host name (localhost)
Cluster virtual IP address
Cluster virtual machine name
NONE
NONE6
Using and maintaining the Device Manager agent228