HP P9000 Command View Advanced Edition Suite Software 7.2 Administrator Guide (web)

Legend:
No: Does not support any description formats.
Table 90 Support status of HORCM_ALLOW_INST parameter description format
Item
Version
All parameters
NoEarlier than 7.1
Legend:
No: Does not support any description formats.
Requirements for the configuration definition file
A configuration definition file cannot include a line that consists only of space characters.
If the version of Device Manager agent is 5.5 or earlier, a line that starts with H and includes any
of the following character strings cannot be included (except in the starting line of the parameter):
HORCM_MON, HORCM_CMD, HORCM_DEV, HORCM_LDEV,HORCM_INST, HORCM_INSTP, HOR-
CM_CTQM, HORCM_LDEVG, HORCM_ALLOW_INST
If the version of the Device Manager agent is from 7.0.0 to 7.0.1, a virtual command device must
not be defined for the HORCM_CMD parameter in the configuration definition file.
The configuration definition file must be created in accordance with the following conditions:
HORCM_MON must be defined.
At a minimum, either HORCM_DEV or HORCM_LDEV must be defined.
At a minimum, either HORCM_INST or HORCM_INSTP must be defined.
HORCM_ALLOW_INST must not be defined.
The following tables show the contents and specified items in a configuration definition file for each
parameter. For details about description rules for the content that can be specified, see Detailed
rules for configuration definition files on page 228.
Table 91 HORCM_MON parameter items and descriptions
DescriptionItem
Specify the IP address (the Device Manager agent whose version is 5.9 or later
supports the IPv6 protocol), host name, NONE, or NONE6.
Note that if you use Replication Manager to generate a configuration definition
file, this item will always be specified for the host name (Replication Manager uses
a Device Manager agent to view the configuration definition file).
ip_address
Specify the port name or port number.
service
Specify a value (in ten millisecond units) or -1.poll(10ms)
Using and maintaining the Device Manager agent226