HP P9000 Command View Advaced Edition Software Update 7.2.0-02 Release Notes (TB581-96305, March 2012)

Volumes allocated to ports with LUN security disabled
The following notes apply to volumes allocated to ports with LUN security disabled.
• In the Hosts view, volumes allocated to a host do not appear. Confirm the volume information in
the Open-Allocated view.
• Volumes allocated to multiple ports with LUN security disabled cannot be unallocated from specific
ports. Use one of the following tools to unallocate only the volumes that are allocated to specific
ports:
◦ Remote Web Console
◦ Device Manager CLI
GUI operations after upgrading Device Manager
After upgrading Device Manager , reboot the browser used as the GUI or clear a cache of the browser,
and log into Command View Advanced Edition Suite products.
If the above operation is not performed, the GUI might be inoperative.
Screen appearance
The information might not appear on the screen or the screen might be frozen. In this case, refresh
the screen or log in again.
The task details dialog box for starting monitoring, stopping monitoring, starting
relocation, and stopping relocation
The KAIC06400-E error of a storage system might occur in the message column of the pool selected
in the task details dialog box.
Check the monitoring status or relocation status of the pool in the pool list.
Operating the Device Manager GUI
Before completion of drawing a view, do not operate anything for it. If you do so, an unexpected
error such as KAIC16009-E might occur. If this occurs, try the operation again. If this symptom
continuously occurs, log in to the Device Manager again and retry the operation.
KAIC05607-E or KAIC06400-E error during an operation
• If the KAIC05607-E or KAIC06400-E error occurs during a Migrate Data operation, some of
the configuration changes might be applied to the storage system. Therefore, the content of the
Task Status displayed in the Migration pairs table on a Task Details dialog of Migrate Data might
not correspond to the configuration of the storage system. If this occurs, refresh the storage system
information and check the current storage system configuration. After that, perform the Migrate
Data operation again using the recent Task Status and the configuration of the storage system.
• If the KAIC05607-E or KAIC06400-E error occurs during a Device Manager GUI or CLI operation
to change a storage system configuration, some of the configuration changes might have been
applied to the storage system. Refresh the storage system information and check the current storage
system configuration. After that, continue the configuration change operation by using the Device
Manager GUI, CLI, or Element Manager.
Using Host Data Collector to register Windows hosts on a Solaris or Linux server
If using Host Data Collector on a Solaris or Linux server to register or refresh a Windows host and the
message ERR_1202 appears, retry registering or refreshing the host.
ERR_1202 : Unable to copy all the files to the remote server. (Remote
server: <IP_ADDRESS_OF_TARGET_HOST>, Cause: session setup failed: Call
22 Important considerations