HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

80 Using the Graphical User Interface
Running the Command View SDM GUI
There are several methods for running the Command View SDM GUI, each of
which is described here.
Note Accessing the array from a remote client requires the
proper access
Regardless of the method you use to start the GUI, a remote
client will need the proper access rights to manage an array.
See "Setting up Remote Client Access" on page 50 for more
information.
Watch Your Case
On an HP-UX system, case is important. The Launcher and
cmdviewVA must be entered with an upper case L and VA,
respectively. For example:
http://<hostname>:4096/Launcher.html
http://<hostname>:4096/cmdviewVA.html?<hostname>:<array-id>
User Security
The Command View SDM software enables you to set user level security.
Enabling User Security
Security is enabled via the
\sanmgr\commandview\server\config\PanConfigParams.txt entry
SECURITY_ENABLED. Setting the value to =true will enable security, setting
=false will disable security. When security is enabled, the user will be
explicitly prompted with a login screen over a remote or local host.
Note Security is not checked over the serial port.
Running the Launcher from the Windows Icon
During installation on a Windows host, a
Command View SDM Launcher icon is placed on
the desktop. You can start the GUI from this icon.