HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

42 Installing Command View SDM
Uninstalling HP Command View SDM Software from Windows
This procedure describes uninstalling the Command View SDM software. The
existing Command View SDM software should be removed before installing a
new version of the software. The uninstall process does not automatically
delete the array log files. If you want to delete the log files, you will have to do
so manually.
1 If you are upgrading to a newer version of Command View SDM, save any
configuration files you may have customized. See "Saving and Restoring
Array Configuration Information" on page 48.
2 Close OpenView SAM if uninstalling on a SAM management station.
3 Select Start > Settings > Control Panel > Add/Remove Programs.
4 Select hp command view from the list of applications, and then click
Add/Remove.
5 Follow the screens to uninstall Command View SDM.
Note If there has been a problem with the software or the array, the
logs should be retained and used to reference for
troubleshooting. If you are certain you will not need to access
the logs, they can be removed.
6 To remove the logs files, delete the following folder:
\sanmgr\commandview\server\logs