HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Installing Command View SDM 35
Installing
Command View SDM
CMDVIEWSDM
5 Remove the components.
Note If any of the components selected for removal are required by
other applications, the component will not be removed and an
error message will be displayed. This message can be ignored.
Note If you may need the contents of the existing log files, do not
perform the next step. The log files may be useful in isolating
problems you may have been experiencing with the array.
6 Remove the log files using the following commands:
rm -fR /opt/sanmgr
rm -fR /etc/opt/sanmgr
rm -fR /var/opt/sanmgr
HP-UX System Support Software
In addition to Command View SDM, there are additional HP-UX applications
that can be used to manage and diagnose storage devices. These applications
either integrate with Command View SDM, or they provide their own
management options. These applications include:
System Administration Manager (SAM)
Support Tools Manager (STM)
Off-Line Diagnostic Environment (ODE)
The HP-UX Support Plus CD-ROM (June 2001 or later) includes the versions of
these applications that support the HP StorageWorks Virtual Array products.