HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Command Line User Interface 117

Command Line User Interface

1 Identify the current product numbers and firmware versions of the disk

modules on the array with alias MyArray:

armdownload -I D MyArray

The following output is displayed:

Vendor Product ID Rev FRU Location

HP 36.4G ST336704FC HPC1 M/D1

HP 36.4G ST336704FC HPC1 M/D2

HP 18.2G ST318451FC HPC0 M/D5

HP 18.2G ST318451FC HPC0 M/D6

HP 18.2G ST318451FC HPC0 M/D7

HP 18.2G ST318451FC HPC4 M/D8

2 Copy the latest firmware file (HPC3 in this example) for the ST336704FC

disks to the host.

3 Download the HPC3 firmware file to all ST336704FC disk modules by

entering the following command:

armdownload -D -P ST336704FC ST336704.HPC3 MyArray

Array Controller Firmware Download

This example downloads firmware to the array controller. The armdownload

command is used to identify the controllers and then download the firmware.

The firmware file is located in the default firmware directory.

1 Identify the current firmware versions of the array main controllers for array

MyArray:

armdownload -I C MyArray

The following output is displayed:

Vendor Product ID Rev FRU Location

HP A6188A HP02 M/C2

2 Copy the appropriate firmware file (A6188AHP10.frm in this example) to

the host.