HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

104 Command Line User Interface
Deleting LUNs
To delete LUN 17 in the array with the alias of myArray, type the following
command:
armcfg -L 17 -d myArray
Adding Disks
After a disk is inserted into the array, it must be added to the array
configuration. If auto-include and autoformat are enabled, the disk will be
automatically added. If these options are disabled, you will need to manually
add a disk. To add a disk that has just been installed in disk enclosure 2 on
FC loop 1, slot 5, type the following command:
armcfg -D JA2/D5 -a myArray