HP StorageWorks SMI-S v.3.7 in a Command View for Tape Libraries (CVTL) v.3.7 Environment Release Notes (QN998-96119, December 2013)

ManualsBrandsHP ManualsSoftwareHP Command View for Tape Libraries

HP StoreEver SMI-S Tape Provider Version

3.7.00 in a Command View for Tape Libraries

3.7.00 Environment Release Notes

HP Part Number: QN998-96119

Published: December 2013

Edition: 8

Summary of content (5 pages)

PAGE 1
HP StoreEver SMI-S Tape Provider Version 3.7.00 in a Command View for Tape Libraries 3.7.
PAGE 2
Version: HP StoreEver SMI-S Tape Provider Version 3.7.00 Description HP StoreEver SMI-S Tape Provider is certified by the Storage Networking Industry Association (SNIA). It is not installed by default during the installation of Command View TL. The custom installation step has to be followed to select Tape Provider installation.
PAGE 3
CIMOM Pegasus CIMOM 2.11.0 Minimum requirements For environments with fewer than 10 tape libraries, Command View TL requires a management station (server) with a minimum of: • 1.6-GHz CPU, 2-GB RAM • 2 GB of free disk space for installation • 10/100 Base-T network card (static IP address recommended) • Compatible with VMWare ESX 5.0 Recommended system For environments with up to 20 tape libraries: • 3.0-GHz CPU or greater, Dual Core, 4-GB RAM For environments with 20 to 70 tape libraries: • 3.
PAGE 4
Fixes • N/A Workarounds Pegasus CIM Object Manager command (cimuser, cimauth, cimprovider, cimsub etc) crash during configuration of CIM Server Symptoms: Occasionally during configuration of CIM Object Manager commands such as cimuser, cimauth etc may crash inconsistently. Workaround: 1. Set Pegasus CIM Object Manager service to automatic restart mode. 2. Open new command prompt and try to execute command. Repeat this step, if command fails.
PAGE 5
“HP StorageWorks CIM Object Manager” service not started after a custom installation of Command View TL with SMI-S Tape provider selected Symptom: Install Command View TL in custom mode with SMI-S Tape provider selected. The “HP StorageWorks CIM Object Manager” service is not started. When starting the service manually, the following warning appears: The HP StorageWorks CIM Object Manager service on Local Computer started and then stopped.