HP QLogic Converged Network Adapter Installation Guide (747713-001, September 2013)

1. Enter the QLogic NIC Boot Code setup menu. After the server is powered on, pressCtrl+Q
when the QLogic NIC Boot Code banner appears to enter the setup menu.
Figure 10 QLogic NIC Boot Code setup menu example
2. The QLogic Function Configuration Setup Menu appears. Use up and down arrow keys to
select the CNA to modify.
Each CNA port supports one function type - NIC, FCoE, or iSCSI. Functions 0 and 1 support
NIC functions type. Functions 4 and 5 support iSCSI function type. Functions 6 and 7 support
FCoE function type. Functions 2 and 3 are not used.
HP Restricted Setting the Storage Personality 11