10GigEthr-03 (iocxgbe) B.11.31.1111 Ethernet Driver Release Notes

Multi-queue enables traffic to be partitioned across CPUs. The CNA supports only receive
multi-queue operation. Multiple queues are supported only on the first PCIe function for each
port: function 0 (port 0) and function 1 (port 1).
The iocxgbe driver sets the number of receive queues for each of these PCIe functions to 5;
the default was 1 prior to this release. The number of queues for each remaining PCIe function
is 1 and remains 1.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3, Application Release B.11.31.1009 or later.
5.2 Hardware requirements
This version of 10GigEthr-03 runs on HP Integrity BL8x0c i2 server blades with the HP-UX 11i v3
(B.11.31) operating system. To support profile migration on NC551m adapters, Virtual Connect
(VC) firmware version 3.17 or later is required.
6 Related information
HP references
The latest documentation for Ethernet and CNA cards is available in English at:
http://www.hp.com/go/10-gigabit-ethernet-docs
Other references
For additional information about configuring and updating UEFI functionality on these product,
see the Emulex Boot Manual on Emulex website, at:
http://www.emulex.com/files/downloads/hardware/boot_manual.pdf
7 Software availability in native languages
The 10GigEthr-03 product is available only in the English language.
5 Compatibility and installation requirements 5