HP XP Cluster Extension Software Administrator Guide

PostExecCheck
Format String
Description (Optional) The PostExecCheck object is used to configure XP Cluster Extension to
gather disk pair status information after the takeover procedure. This information is
passed to the post-executable. In case of a remote data center failure, it could be
time consuming to gather that information, especially if your post-executable does
not need any XP status information. The arguments passed to the post-executable
include only the local disk status if the PostExecCheck object is set to NO. See “Setting
up RAID Manager” (page 9).
Valid values YES
NO (default)
PostExecScript
Format String
Description (Optional) Specifies an executable with its full path name to be invoked after the
takeover action or failover procedure.
PreExecScript
Format String
Description (Optional) Specifies an executable with its full path name to be invoked before
the takeover action or failover procedure.
RaidManagerInstances (Required)
Format List
Description A space-separated list of RAID Manager instances that XP Cluster Extension can use
to communicate with the disk array. The instance numbers must be the same among
all cluster systems. XP Cluster Extension can alternate between the specified instances.
Files %systemroot%\horcmX.conf
where X is the RAID Manager instance number.
ResyncMonitor
Format String
Description (Optional) Starts the pair/resync monitor to monitor the disk pair status and
resynchronize disk pairs if the ResyncMonitorAutoRecover attribute is set to YES.
Valid values YES
NO (default)
ResyncMonitorAutoRecover
Format String
Description (Optional) Automatically recovers disk pairs states if the disk pairs are monitored
by the pair/resync monitor.
Valid values YES
NO (default)
ResyncMonitorInterval
Format Integer
APPLICATION objects 57