HP XP Cluster Extension Software Administrator Guide

• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure XP Cluster Extension
resource properties from a remote management station or through the CLI, the properties you
enter are not validated.
To use the resource configuration tool:
1. Open a command window and enter ClxXpResConfig.exe.
2. Select the resource you want to change in the XP CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring RAID Manager instance numbers for RAID Manager service
To configure RAID Manager instance numbers from the Failover Cluster Management Parameters
tab or the resource configuration tool:
1. To add an instance:
a. Click Add to open the Add RAID Manager instances window.
b. Select one or more instances and click OK.
2. To remove an instance, select it and click Remove.
3. Click OK to save your changes and close the window.
Configuring the RAID Manager device/copy group details
To configure RAID Manager device/copy group details from the Failover Cluster Management
Parameters tab or the resource configuration tool:
Configuring XP Cluster Extension resources 23