HP P6000 Cluster Extension Software Installation Guide (5697-2275, November 2012)

In addition to showing the results of the installation process, the .result file helps you identify
the status of remote maintenance if cluster level maintenance (modify, repair, remove) fails.
NOTE: If the .result file is not found on the remote cluster node, run the P6000 Cluster Extension
setup by logging on to the remote cluster node locally.
If you receive an error similar to Another installation is already in progress…,
then stop the process IDriver.exe (and msiexec.exe), or reboot the node and rerun the
P6000 Cluster Extension setup locally.
Example
If you start a cluster-wide installation on Node1 of a 3-node cluster, with all nodes selected for
installation, and the network connection to Node2 and Node3 is lost by Node1, then the
cluster-wide installation process cannot get the status of the remote node installation. In this situation,
use the %WINDIR%\CLXSetup_nodename.result file to obtain the remote node installation
status. To check the .result file for the remote nodes, log on to Node2 and Node3, and access
the file %WINDIR%\CLXSetup_nodename.result on each node. Compare the errors in the
file to the information in “Windows remote installation error codes” (page 20).
NOTE: If cluster installation fails with the message Could not get the system drive
for the cluster node... or Setup was unable to run the installation in
remote machine..., confirm that the WMI service is running. To use the P6000 Cluster Extension
cluster-wide installation feature, the WMI service must be running.
Table 1 Windows remote installation error codes
Corrective actionDescriptionERROR code
N/AInstallation was successful on the local
cluster node.
ERROR_INSTALLATION_SUCCESS
N/AP6000 Cluster Extension was
successfully removed from the local
cluster node.
ERROR_REMOVAL_SUCCESS
N/AP6000 Cluster Extension was
successfully repaired on the local
cluster node.
ERROR_REPAIR_SUCCESS
N/AP6000 Cluster Extension was
successfully modified on the local
cluster node.
ERROR_MODIFY_SUCCESS
Run the setup on the local cluster node.Setup failed on the local cluster node.ERROR_READ_INPUT_FILE_FAILED
The silent input file is corrupted.
Run the setup on the local cluster node.Setup failed on the local cluster node.ERROR_INVALID_HANDLE
Internal Error. Could not invoke the DLL.
Run the setup on the local cluster node.Setup failed on the local cluster node.SILENT_INPUT_FILE_CORRUPTED
The silent input file is corrupted or
could not be found.
Run the setup on the local cluster node.Setup failed on the local cluster node.LOCAL_NODE_NAME_NOT_FOUND
Could not find the local node name.
Register the resource type by running
the following cluster command:
Installation completed on the local
cluster node.
ERROR_CLXMSCS_REGISTER_FAILED
cluster restype "Cluster
Setup was unable to register the
resource type Cluster Extension P6000.
Extension EVA" /create
/dll:clxevamscs.dll
/type:"Cluster Extension
20 Installing P6000 Cluster Extension Software