HP P6000 Cluster Extension Software Installation Guide (5697-0987, June 2011)
NOTE:
If cluster installation fails with the message Could not get the system drive for the
cluster node... or Setup was unable to run the installation in remote
machine..., confirm that the WMI service is running. To use the P6000 Cluster Extension cluster-wide
installation feature, the WMI service must be running.
Table 1 Windows remote installation error codes
Corrective actionDescriptionERROR code
N/AInstallation was successful on the local
cluster node.
ERROR_INSTALLATION_SUCCESS
N/AP6000 Cluster Extension was
successfully removed from the local
cluster node.
ERROR_REMOVAL_SUCCESS
N/AP6000 Cluster Extension was
successfully repaired on the local cluster
node.
ERROR_REPAIR_SUCCESS
N/AP6000 Cluster Extension was
successfully modified on the local cluster
node.
ERROR_MODIFY_SUCCESS
Run the setup on the local cluster node.Setup failed on the local cluster node.
The silent input file is corrupted.
ERROR_READ_INPUT_FILE_FAILED
Run the setup on the local cluster node.Setup failed on the local cluster node.
Internal Error. Could not invoke the DLL.
ERROR_INVALID_HANDLE
Run the setup on the local cluster node.Setup failed on the local cluster node.
The silent input file is corrupted or could
not be found.
SILENT_INPUT_FILE_CORRUPTED
Run the setup on the local cluster node.Setup failed on the local cluster node.
Could not find the local node name.
LOCAL_NODE_NAME_NOT_FOUND
Register the resource type by running
the following cluster command:
cluster restype "Cluster
Extension EVA" /create /
dll:clxevamscs.dll /
type:"Cluster Extension EVA"
Installation completed on the local cluster
node.
Setup was unable to register the
resource type Cluster Extension P6000.
ERROR_CLXMSCS_REGISTER_FAILED
Register the resource extension DLL by
running the following cluster command:
Cluster /
regadminext:clxevamscsex.dll
Installation completed on the local cluster
node.
Setup was unable to register the Cluster
Extension EVA DLL.
ERROR_CLXMSCSEX_REGISTER_FAILED
Installing P6000 Cluster Extension Software for Windows26