HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

1. Name (resource name)
2. Reserved
3. DR group name (DeviceGroup object)
4. Link state
5. DR mode (source/destination)
6. Log state
7. Failsafe mode
8. Failsafe lock state
9. Suspend mode state
10. Storage system WWN (local)
11. Storage system WWN (remote)
12. VCS firmware version
13. Application directory path (ApplicationDir object)
14. Log file location (LogDir object)
15. DC_A_Hosts node names
16. DC_B_Hosts node names
Pre-executables and post-executables must supply a return code. The return code is used to
determine whether a failover function is called.
Pre-execution return codes
DescriptionTextPre-execution return
code
Pre-executable OK and failover action allowed.PRE_OK_TAKEOVER0
Pre-executable failed; no failover; stop application
service cluster-wide. Microsoft Cluster service does not
allow cluster-wide or data-center-wide disabling of
resources. This is local error behavior.
PRE_ERROR_GLOBAL1
Pre-executable failed; no failover; stop application
service in this data center. MSCS does not allow
cluster-wide or data-center-wide disabling of resources.
This is local error behavior.
PRE_ERROR_DC2
Pre-executable failed; no failover; stop application
service on this system.
PRE_ERROR_LOCAL3
Pre-executable failed; failover action allowed.PRE_ERROR_TAKEOVER4
Pre-executable OK; no failover; no post-exec.PRE_OK_NOTKVR_NOPST5
CLI commands and utilities98