HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Command-line utilities
Command-line utilities are also included with P6000 Cluster Extension to allow configuration of P6000
Cluster Extension on all platforms for both the CLI (clxevarun) and cluster integration.
clxconf
Description Use clxconf to manually retrieve the consistency set object paths for a DR
group and place them in a file called clxobjectpaths.cfg located in
the P6000 Cluster Extension conf directory.
• Windows: %HPCLX_EVA_PATH%
• Linux: /etc/opt/hpclxeva/conf
The consistency set object paths are required for clxevarun, RHCS, and
SLE HA integration.
NOTE:
For RHCS and SLE HA, the file equivalent to the user
configuration file UCF.cfg is called the P6000 Cluster
Extension resource configuration file.
clxconf is used as part of the P6000 Cluster Extension configuration
process for the CLI, RHCS, and SLE HA integration. After clxconf places
information in clxobjectpaths.cfg, that information must be copied to
UCF.cfg and the P6000 Cluster Extension resource configuration file.
Syntax clxconf –smis [–sg file_name package_name]
Operands Required parameter for clxevarun, RHCS, and
SLE HA integration
-smis
-sg Specify Linux integration
file_name P6000 Cluster Extension resource configuration file
(CLXEVA.config)
package_name Application name configured in the P6000 Cluster
Extension resource configuration file
(CLXEVA.config)
Example 1
clxevarun configuration
# clxconf -smis
In this example, clxconf assumes that one or more APPLICATION tags
are defined in the UCF.cfg file and have specified all necessary objects,
including the DeviceGroup object, to map the DR group to the application
service.
HP P6000 Cluster Extension Software Administrator Guide 91