HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Creating the P6000 Continuous Access environment

HP support personnel are trained to set up P6000 Continuous Access. You can configure and change

DR groups and HP SMI-S server instances using HP P6000 Command View, and the HP P6000

Continuous Access GUI. For more information, see the documents listed in “Related

documentation” on page 107.

Installing and configuring the HP P6000/EVA SMI-S server

If not previously completed, install and configure HP P6000/EVA SMI-S server on all management

servers. For complete procedures, see the HP P6000 Command View Installation Guide.

Configuring the HP P6000/EVA storage system

To configure the HP P6000/EVA storage system you must:

• Create hosts.

• Create vdisks and add a LUN presentation.

• Create DR groups.

• Add a LUN presentation to the destination vdisk.

For detailed procedures, see the HP P6000 Command View Installation Guide.

Creating and configuring the user configuration file

The CLI expects as an argument the name configured as the APPLICATION tag value.

The following is an example of a customized user configuration file when using clxevarun:

---- Sample UCF.cfg begin

APPLICATION CLX030

DeviceGroup \Data Replication\DRG030 #DR group

DC_A_StorageCellWWN 50001FE15002B5A0

DC_B_StorageCellWWN 50001FE15002B570

DC_A_ManagementHosts smam019fk351k # active sma

DC_B_ManagementHosts clxeva1 # passive sma

FailsafeMode disable

DC_A_Hosts w2k7 w2k6

DC_B_Hosts w2k5 w2k8

CSObjectPathA HPEVA_ConsistencySet.InstanceID="50001FE15002B5A0.6005-08b4-

0001-2b74-0000-6000-021a-0000"

CSObjectPathB HPEVA_ConsistencySet.InstanceID="50001FE15002B570.6005-08b4-

0001-27b1-0000-7000-03fe-0000"

APPLICATION CLX031

DeviceGroup \Data Replication\DRG031 #DR group