HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Description Space-separated list of management servers for data center B. P6000 Cluster Ex-
tension attempts to establish a management path (HP SMI-S) connection with one
of the management servers on the hosts in the list. The first host in the list that estab-
lishes a successful connection with P6000 Cluster Extension is used as the manage-
ment path for the failover operation. P6000 Cluster Extension attempts to connect
to the management hosts in the local data center first, before using management
hosts in the remote data center. The hosts listed for data center B are associated
with data center B and do not necessarily need to be physically located in data
center B. You can specify the hosts using either the system host name or the IP ad-
dress.
DC_A_StorageCellWWN (Required)
Format String
Description The WWN of the P6000/EVA storage system located in data center A. This is the
node WWN value indicated in the Storage System Properties page in P6000
Command View.
DC_B_StorageCellWWN (Required)
Format String
Description The WWN of the P6000/EVA storage system located in data center B. This is the
node WWN value indicated in the Storage System page in P6000 Command
View.
DeviceGroup (Required)
Format String
Description P6000 Continuous Access DR group, containing the application service disk set.
FailsafeMode (Optional)
Format String
Description Specifies the failsafe mode configured for the DR group. Use this object to ensure
that your configurations are supported based on consistency considerations. Different
failover and recovery procedures are used for different failsafe modes. If you change
the FailsafeMode object value, review the value of the FailsafeModeOverride object.
This property applies to synchronous DR groups only.
NOTE:
P6000 Command View displays two failsafe modes for the EVA4400.
The FailSafeMode property in P6000 Cluster Extension corresponds
to Failsafe on unavailable member on the EVA4400. See the P6000
Command View documentation for more details.
User configuration file and P6000 Cluster Extension objects82