HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

4. Run clxconf to obtain values for CSObjectPathA and CSObjectPathB.
clxconf -smis -sg /etc/opt/hpclxeva/conf/CLXEVA.config CLXWEB
The values for CSObjectPathA and CSObjectPathB are located in the file etc/opt/hpclxeva/
conf/clxobjpaths.cfg. For example:
#cat etc/opt/hpclxeva/conf/clxobjpaths.cfg
APPLICATION CLXWEB
CSObjectPathA HPEVA_ConsistencySet.InstanceID="50001FE100270C30.6005-08b4
-0010-2e9b-0000-5000-0039-0000"
CSObjectPathB HPEVA_ConsistencySet.InstanceID="50001FE100270CA0.6005-08b4
-0010-2971-0000-8000-00f3-0000"
5. Copy the information from clxobjpaths.cfg into the configuration file /etc/opt/hpclxeva/
conf/CLXEVA.config.
COMMON
#LogLevel info
APPLICATION CLXWEB
DC_A_StorageCellWWN 50001FE100270C30
DC_B_StorageCellWWN 50001FE100270CA0
DeviceGroup \Data Replication\clxwebdrg
DC_A_Hosts Host1 Host2
DC_B_Hosts Host3 Host4
DC_A_ManagementHosts clxsmaxlxla
DC_B_ManagementHosts clxsmaxlxlb
CSObjectPathA HPEVA_ConsistencySet.InstanceID="50001FE100270C30.6005-08b4
-0010-2e9b-0000-5000-0039-0000"
CSObjectPathB HPEVA_ConsistencySet.InstanceID="50001FE100270CA0.6005-08b4
-0010-2971-0000-8000-00f3-0000"
ApplicationStartup RESYNCWAIT
6. Copy the updated /etc/opt/hpclxeva/conf/CLXEVA.config file to the other cluster
nodes.
Creating a P6000 Cluster Extension resource for Pacemaker
This procedure uses the Linux HA Management Client and Pacemaker. For specific instructions on
using the GUI, see the SuSE Linux Enterprise High Availability Extension documentation.
1. Start the Linux HA Management Client.
2. Select Add group from the Resources menu, and enter a group ID.
3. Add P6000 Cluster Extension as a primitive group's first resource.
NOTE:
The resource hierarchy depends on the order in which resources are added. Always add
P6000 Cluster Extension resources as the first resource in a group.
Configuring P6000 Cluster Extension for Linux66