HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

2. To remove a disk array, select the array, and then click Remove.
3. To modify a disk array, select the array, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or OK to save your changes
and close the Properties window.
Configuring cluster node data center assignments
To configure cluster node data center assignments from the cluster software Parameters tab or the
resource configuration tool:
1. To add a cluster node:
a. Click Add to open the Add Server Data center Assignment window.
b. Select a cluster node from the Server Name list.
c. Assign the cluster node to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a cluster node, select the node, and then click Remove.
3. To modify a cluster node, select the node, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or OK to save your changes
and close the Properties window.
Selecting a DR group
Use the cluster software Parameters tab or the resource configuration tool to select the DR group
containing the disk that will be managed by the P6000 Cluster Extension resource.
1. Click Browse.
HP P6000 Cluster Extension Software Administrator Guide 41