HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Using the resource configuration tool to set resource properties (Server Core and Hyper-V Server)
For Server Core or Hyper-V Server, use the P6000 Cluster Extension resource configuration tool to
set resource properties. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on a remote
management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you can
switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments because
the properties you enter are validated. When you configure P6000 Cluster Extension resource
properties from a remote management station or through the CLI, the properties you enter are not
validated.
To use the resource configuration tool:
1. Open a command window and enter CLXEVARESCONFIG.EXE.
2. Select the resource you want to change in the P6000 CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring P6000 Cluster Extension for Windows38